Ventilation Units for EasyHome SmartHome

   Ventilation is essential in any modern building, and the EasyHome system allows you to flexibly control speed and temperature conditions for maximum comfort and energy efficiency. It is possible to link the ventilation unit to a separate room or to a group of rooms at the same time according to the average climate requirements in them. The system allows you to monitor the basic parameters and receive timely messages about the need for maintenance or malfunctions of the units. The basic functionality is determined by the installation itself and the built-in control controller included in the package. Up to 5 ventilation units can be connected to one controller of the EasyHome Smart Home system via the RS485 interface and one for direct control of the vent machine elements.

Integration is performed via the RS485 interface via the Modbus RTU Protocol with the following types of devices:

 SystemAir.com
  Model and description:   Notes:
         
Вентмашины SystemAir
Вентмашины SystemAir
     

TOPVEX, Frivent and other series with controllers:
Corrigo 3. X, E28x, etc. with RS485 port:
- Turn on and off
- Smooth flow adjustment from 0 to 5100m.cubic meters per hour
- Separate flow and exhaust speed adjustment
- Setting the temperature and humidity settings
- Monitoring of inflow and exhaust temperatures
- Monitoring of temperatures in the street release
- Monitoring mode, filter, and crashes
- Reset the alarms

     

- May have the name SystemAir
either Corrigo or only E28x.
- Default speed is 9600 8N2
Modbus RTU Address 1

 

 Komfovent.com
    Available from controllers:     Komfovent C3     Komfovent C4     Komfovent C5     Komfovent C6

Вентмашины Komfovent

Вентмашины Komfovent         
                   
  Switching on and off   +   +   +   +
  Smooth speed control       20..100%   m3 per hour   20..100%
  Step speed control   1,2,3             
  Separate inflow and exhaust control   -   +   +   +
  Flow rate indicator   m3 per hour   0..100%   m3 per hour   0..100%
  Setting the temperature setpoint   +   +   +   +
  The temperature of the inflow   +   +   +   +
  The temperature of the room air   +       +   +
  Street temperature           +   +
  The temperature of the exhaust           +    
  Water temperature   +   +   +   +
  Mode monitoring   +   +   +   +
  Filter and Alarms monitoring   +   +   +   +
  Monitoring of the heater   +   +   +   +
  Monitoring of heat exchanger           +   +
    Remote Alarms reset           +   +
    Default communication:   19200 8E1 Adress 20   19200 8E1 Adress  1

 

 Enervent.com
  Model and description:   Notes:
Вентмашины Enervent

Вентмашины Enervent
     


- Turn on and off
- Smooth flow adjustment from 0 to 100%
- Separate flow and exhaust adjustment
- Setting the temperature setpoint
- Monitoring of inflow and exhaust temperatures
- Monitoring of temperatures in the street release
- Monitoring of the water temperature
- Recuperator and humidity monitoring
- Monitoring mode, filter, and crashes

     


- Driver pending on control EDA (2014).
- On the new eWind and eAir consoles
not tested, but the Protocol
the same (2018).
- The default baud rate of 19200 8N1
- RJ11 connector

 

 Salda.lt
    Available from controllers:     VEGA     RIS EKO3.0

Вентмашины SALDA

Вентмашины SALDA
           
  Switching on and off   +   +
  Step speed control   1,2,3    1,2,3 
  Exhaust  flow rate indicator   0,1,2,3    0,1,2,3 
  Inflow rate indicator       0,1,2,3 
  Setting the temperature setpoint   +   +
  The temperature of the inflow   +   +
  The temperature of the room air       +
  The humidity of the room air       +
  Exhaust and street temperature       +
  Water temperature       +
  Monitoring of the heater   +   +
  Filter and Alarms monitoring   +   +
    Remote Alarms reset   +    
    Default communication:   19200 8N1 (RJ11)

 

 BreezArt.ru
    Available from controllers:      RCCU 3.22     RCCU 3.2M2 POOL
Вентмашины BreezArt

Вентмашины BreezArt
           
  Switching on and off   +   + standby mode
  Step speed control   1,2..8   0/50/100%
  Flow rate indicator   0,1,2..8   0/50/100%
  Setting the temperature setpoint   +   +
  Setting the temperature setpoint   +   +
  The temperature of the inflow   +   +
  The temperature of the room air       +
  Exhaust and street temperature        
  Water temperature   +   +
  Monitoring of the heater        
  Filter and Alarms monitoring   +   +
    Remote Alarms reset   +   +
    Default communication:   19200 8E1 Adress 1 ONLY (instead of a remote control)

 

Integration is performed by direct management with the following types of devices ( DirectVent ):

 Electrolux.ru
  Model and description:    
         
Вентмашины SystemAir
Вентмашины SystemAir
     

ELECTROLUX STAR EPVS series and vents
ANY MANUFACTURER with simple controllers
or no automation at all.
Management is done directly:
- Turn on and off
- Smooth flow adjustment from 0 to 100%
- Separate flow and exhaust speed adjustment
- Setting the temperature setpoint
- Monitoring of T inflow, exhaust, intake, room
- Channel dampers
- Monitoring of the filter
- Alarms monitoring

     

The automation kit can strongly
vary from required
features and functions:
Required for management integration:
- relay or contactor-DO output
- controller or frequency converter-AO output
- separate sets for fans
- heater and regulator-AO output
- temperature sensors-AI inputs
- mechanization drives-DO outputs
- pressure sensor 0-10V-AI input
- freeze sensor, etc. - DI inputs



The role of the vent machine can be performed by a Central air conditioner with fresh air intake, RS485 control:

IntesisBox.com/hvac/
         
Вентмашины кондиционеры
Вентмашины кондиционеры
     

Gateway compatible models are integrated into the system
IntesisBox XX-AC-MBS-1 :
Mitsubishi, Daikin, Fujitsu, Hitachi, Hisense,
LG, Midea, Panasonic, Samsung, Toshiba

- Turn on and off
- Step speed adjustment 1,2,3,4
- Setting the input flow temperature setpoint
- Room temperature monitoring
- Setting the heating/cooling/fan mode
- Filter and Alarms monitoring

     

 

    There are also a number of freely programmable controllers for automatic ventilation. An individual program and a Modbus RTU/TCP register table are created for them by the manufacturer/installer of the ventilation equipment. To integrate such ventilation equipment into the EasyHome Smart Home system, you need a description of the implemented register table from the manufacturer/installer and individual writing and debugging of the software driver, examples of such controllers:

Carel pCO Notes:


Requires an RS485 adapter card
- PCOS004850
- installed inside the housing
- Modbus RTU



   
Danfoss MCX  




RS485 connector with Modbus RTU built in
   
Segnetics Pixel  

RS485 connector with Modbus RTU built-in,
but it may be busy with extension modules.

An Ethernet PNA adapter can be connected,
which provides Modbus TCP communication.

   
Zentec  

RS485 connector with Modbus RTU built-in,
but it may be busy with extension modules.